CX450 InTemp Temp/Relative Humidity Data Logger

CX450

The InTemp CX450 Bluetooth Low Energy Temp/RH data logger monitors temperature and relative humidity in storage and transportation environments. The logger uses Bluetooth Low Energy (BLE) technology to wirelessly communicate with the InTemp CX5000 Gateway and/or the free InTemp mobile app and send data to the free InTempConnect cloud platform.  The external sensor provides highly accurately temperature (-30C to 70C) and humidity (0% to 95%) readings.

The CX450 Temp/RH logger also features a built-in LCD display to view temperature and relative humidity readings, visual alarms (and unique audible alarms), and battery level – plus the ability to view and displayed minimum and maximum readings, without affecting logged data.  

With the addition of the InTemp CX5000 Gateway, users can get text or email notifications of temperature and/or humidity excursions, as well as automatic data downloads from loggers within range of the CX Gateway device.



Features

  •     Easy logger setup and data download in seconds
  •     LCD display, with ability to clear min/max temp and RH readings
  •     Unique audible alarms for temp, RH, and combined temp/RH
  •     AAA battery-powered to guard against local power loss
  •     + 0.5C accuracy for reliable temperature readings from -30C to 70C
  •     + 3% accuracy for reliable RH readings from 0% to 90% (+ 3.5% accuracy for reliable RH readings greater than 90% at 25C)
  •     Two-point NIST Certificate of Calibration, good for one year
  •     Free InTemp mobile app to configure logger, view data, and access the free InTempConnect cloud software service
  •     Real-time alerts and automatic data downloads with optional CX5000 Gateway device

Specifications

Logger

Radio Power 1 mW (0 dBm)
Transmission Range Approximately 30.5 m (100 ft) line-of-sight
Wireless Data Standard Bluetooth Low Energy (Bluetooth Smart)
Logger Operating Range -30° to 70°C (-22° to 158°F), 0 to 95% RH (non-condensing)
NIST Calibration Two-point NIST calibration included
Logging Rate 1 second to 18 hours
Time Accuracy ±1 minute per month at 25°C (77°F)
Battery Type Two AAA 1.5 V alkaline or lithium batteries, user replaceable
Battery Life 1 year, typical with logging interval of 1 minute. Faster logging intervals, remaining connected with the InTemp app, excessive report generation, numerous audible alarms, and paging all impact battery life.
Memory 178 KB (103,400 total measurements or 51,700 temp & RH paired measurements)
Full Memory Download Time Approximately 60 seconds; may take longer the farther the device is from the logger
LCD LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Dimensions 9.4 x 5.6 x 2.59 cm (3.7 x 2.21 x 1.02 inches)
Weight 90.2 g (3.18 oz)
Environmental Rating IP54
CE Compliant The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).
Compliance marks FCC LogoAustralia/New Zealand General Compliance mark

Temperature Sensor

Range -30° to 70°C (-22° to 158°F)
Accuracy ±0.5°C from -30° to 70°C (±0.9°F from -22° to 158°F)
Resolution 0.024°C at 25°C (0.04°F at 77°F)
Drift <0.1°C (0.18°F) per year

RH Sensor

Range 0 to 95% (non-condensing)
Accuracy ±3% from 0% to 90% and ±3.5% from greater than 90% typical at 25°C (77°F)
Resolution 0.01%
Drift <1% per year typical

You might also like

Chat with us on WhatsApp

Product added to wishlist
Product added to compare.

We use our own and third party cookies to obtain statistical data from our users' browsing and to improve our services. If you accept or continue browsing, we consider that you accept its use.