Your cart
There are no more items in your cart
DC Voltage
Home
HOBO USB Micro Station Data Logger
Onset
H21-USB
Rugged and compact, the redesigned HOBO USB Micro Station is a weatherproof data logger for multi-channel monitoring of microclimates. Starting at just EUR 202,22 this battery-powered station accepts up to five plug-and-play Smart Sensors and has a hinged door to make sensor installation simple and quick. The Micro Station is equipped with a built-in USB...
Home
HOBO U30 USB Weather Station Data Logger
Onset
U30-NRC
This rugged weather station is Onset’s most durable outdoor environmental monitoring solution. Users can easily configure the HOBO U30-NRC Weather Station to fit their application needs. Use up to 15 channels to collect environmental data and then upload to HOBOware® software for analysis. HOBOware Pro is recommended for extended features, see the...
Home
VIA (Primary Analog Input Adapter Option for U30 systems) Sensor
Onset
VIA
This item is not sold separately.This option is chosen during U30 system configuration. Recommended as primary analog sensor input.Provides two channels of either 4-20 milliamp inputs or 0 to 20 VDC inputs and 12 volt excitation.
Home
12-bit Voltage Input Adapter Sensor
Onset
S-VIA-CM14
€76.00
The 12-bit Voltage Input Adapter interfaces with sensors providing 0-5 VDC signals to act as a smart sensor with compatible data loggers. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external batteries. It also provides a trigger signal for controlling power to attached external sensors,...
Home
HOBO 4-Channel External Data Logger
Onset
U12-008
Employ multiple energy and environmental sensors, ranging from amps to temperature, with the HOBO U12-008 data logger. Its weatherproof enclosure allows the U12-008 to be flexible to deploy inside or outdoors. The HOBO U12-008 memory stores 43,000 measurements of 12-bit resolution readings.
Home
0 to 24 VoltsDC Voltage Input Sensor
Onset
CABLE-ADAP24
The CABLE-ADAP24 is an external input cable providing analog sensor input of 0-24 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length 1.9m (6.3 ft.).
Home
0 to 10 VoltsDC Voltage Input Sensor
Onset
CABLE-ADAP10
The CABLE-ADAP10 is an external input cable providing analog sensor input of 0-10 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm tinned braided wire leads and a total length 1.9m.
Home
0 to 5 VoltsDC Voltage Input Sensor
Onset
CABLE-ADAP5
The CABLE-ADAP5 is an external input cable providing analog sensor input of 0-5 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm tinned braided wire leads and a total length 1.9m.
Home
0 to 2.5 VoltsDC Voltage Input Sensor
Onset
CABLE-2.5-STEREO
An external input cable with 13mm tinned braided wire leads. Voltage input specifications vary with attached data logger.Overall length of this cable is 1.8m.
Home
HD35 – Wireless Data Logger System
DeltaOhm - GHM Group
HD35
The Delta OHM wireless data logging system allows the monitoring of many physical quantities in various application fields. The data loggers are available for the monitoring of: - Temperature - Humidity - Atmospheric pressure and differential pressure - Illuminance (lux) - UVA, UVB and UVC irradiance - Carbon monoxide (CO) - Carbon dioxide (CO2) - Solar...
Home
HD32.36 – Outdoor housing with acquisition system
DeltaOhm - GHM Group
HD32.36
HD32MT.1 data logger integrated in a fiberglass-reinforced hot-pressed polyester outdoor housing.
Home
RX2105 HOBO MicroRX Station
Onset
RX2105
The compact HOBO MicroRX Station is an easy-to-deploy, low-cost cellular solution for long-term, reliable monitoring of indoor conditions in warehouses, cold storage facilities, data centers, museums, commercial and residential buildings, and more. The station includes an integrated HOBOnet Manager, for easy deployment with wireless HOBOnet sensors. The...
Home
EIC28312-1 Weighing Controller
EIC28312-1
EIC28312-1 can be connected with load cell or other force transducer directly, with fast response, high precision, stable measurement, tare weight, display correction and other adjustment functions. It has 6-channel switch control for start/stop, fast forwardslow into and a variety of control. It can be used for quantitative, ingredient, balance,...
Chat with us on WhatsApp