Energy
Compressed Air Flow Meter -...
Product available with different options
Home

Compressed Air Flow Meter - 1-80 SCFM Sensor

Onset
T-CDI-5200-10S
The T-CDI-5200-10S is a flow meter for compressed air systems. It measures flow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required, and then calculates the flow on the basis of pipe area. This model fits 1" steel pipes.Requires analog port selection during U30 system configuration and use of a...
View
Compressed Air Flow Meter -...
Product available with different options
Home

Compressed Air Flow Meter - 40-600 SCFM Sensor

Onset
T-CDI-5400-20S
The T-CDI-5400-20S is a flow meter for compressed air systems. It measures flow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required, and then calculates the flow on the basis of pipe area. This model fits 1" steel pipes.Requires analog port selection during U30 system configuration and use of a...
View
12-bit Voltage Input...
Available
Home

12-bit Voltage Input Adapter Sensor

Onset
S-VIA-CM14
€76.00
The 12-bit Voltage Input Adapter interfaces with sensors providing 0-5 VDC signals to act as a smart sensor with compatible data loggers. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external batteries. It also provides a trigger signal for controlling power to attached external sensors,...
Electronic Switch Pulse...
Available
Home

Electronic Switch Pulse Input Adapter - 1m Sensor

Onset
S-UCC-M001
€72.00
The Electronic Switch Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a maximum input frequency of 120 Hz (120 pulses per second).
Contact Closure Pulse Input...
Available
Home

Contact Closure Pulse Input Adapter - 1 meter Sensor

Onset
S-UCD-M001
€72.00
The Contact Closure Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This smart sensor is compatible with contact closures, such as tipping-bucket rain gauges or reed switches with a maximum input frequency of 2 Hz (2 pulses per second), and a preferred switch-type of normally-open.
Contact Closure Pulse Input...
Product available with different options
Home

Contact Closure Pulse Input Adapter - 6 meters Sensor

Onset
S-UCD-M006
The Contact Closure Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This smart sensor is compatible with contact closures, such as tipping-bucket rain gauges or reed switches with a maximum input frequency of 2 Hz (2 pulses per second), and a preferred switch-type of normally-open.
View
EG4130 Core - 30 Input... EG4130 Core - 30 Input... 2
Product available with different options
Home

EG4130 Core - 30 Input Meter Data Logger

Onset
EG4130
The EG4130 Core is a 30-channel energy meter with 0.5%  revenue-grade accuracy compliance and the ability to measure residential or commercial circuit panels, up to 3-phase 277/480VAC and 6900A. The meter has HomePlug AV powerline communication, an Ethernet port, and 2 USB ports for additional options, like WiFi. The embedded web server lets you connect...
View
HOBO 4-Channel External...
Available
Home

HOBO 4-Channel External Data Logger

Onset
U12-008
€245.00
Employ multiple energy and environmental sensors, ranging from amps to temperature, with the HOBO U12-008 data logger. Its weatherproof enclosure allows the U12-008 to be flexible to deploy inside or outdoors. The HOBO U12-008 memory stores 43,000 measurements of 12-bit resolution readings.
Split-core AC current...
Product available with different options
Home

Split-core AC current Sensor ( Available in 5 ranges - 20, 50, 100, 200 & 600 Amps)

Onset
CTV-x
A split-core AC current sensor records AC amperage for use with U12 Series, UX120-006M and ZW Series of data loggers with external input channels. With an input current of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag.The molded-plastic housing is rated for indoor use per UL508.
View
Rogowski Coil Sensor...
Product available with different options
Home

Rogowski Coil Sensor (T-EG-4000-2775 and T-EG-7000-2775)

Onset
T-EG-x000-2775
Rope CTs are excellent for bus-bars and large switch-gear applications. Self-powered rope CTs are flexible and easy to install, but will not be accurate below 30A. Each CT includes the two-pin CT connector plug.
View
Temperature (1,8m) Sensor -...
Product available with different options
Home

Temperature (1,8m) Sensor - for be mounted to a pipe or flat surface

Onset
TMC6-HE
A faster response version of our TMC6-HD complete with a plated copper sensor probe that can be mounted to a pipe or flat surface. The sensor is packaged with its own accessories for either strapping to a pipe or attaching to a flat surface.  For use with HOBO U-Series, UX120-006M external-channel data loggers or ZW series wireless datanodes.
View
No-lead Water Flow Meter...
Product available with different options
Home

No-lead Water Flow Meter Sensor

Onset
T-MINOL-130-NL
Measure cold and hot water flow rates with this compact, affordable water meter. The small-sized T-MINOL-130-NL is designed for deployment in apartments, assisted living communities, and other commercial buildings. Please note, the T-MINOL is configured for use with 3/4" pipes. (Use step-ups or step-downs to deploy the T-MINOL with 1/2" or 1" pipe...
View
Multi-channel Handheld... Multi-channel Handheld... 2
Product available with different options
Home

Multi-channel Handheld Thermocouple Temperature Data Logger

EICS220-T8
Thermocouple temperature data logger is a kind of high precision instrument which have pass all strict calibrations and professional testing via FLUKE instrument. Support 8 types thermocouples( K,J,E,T,R,S,N ,B), including thermocouple temperature compensation function and can measure temperature from -200 to 1800℃.
View
Temperature USB Data Logger Temperature USB Data Logger 2
Product available with different options
Home

Temperature USB Data Logger

EIC-E17x
USB temperature data logger with LCD display, elegant appearance,compact design, IP67 standard of waterproof and dustproof, multiple levels of accuracy, battery indicator and USB interface. It is specifically designed for refrigerators and cold-chain transportation.
View
Type K 30cm Probe...
Available
Home

Type K 30cm Probe Thermocouple Sensor Range: 0°C to 900°C

Onset
TCP6-K12
€55.00
The TCP6-K12 Type K thermocouple probe can measure up to 900°C when connect to the UX100 thermocouple logger. The TCP6-K12 stainless-steel probe is 30cm in length, 0.5cm in diameter and is mounted on a 2.5cm handle with spring-type strain relief. The 1.8m 19-AWG cable meets ANSI specifications, complete with isolated thermocouple color-coded for type K...
kWh Monitoring Kit – UX90...
Product available with different options
Home

kWh Monitoring Kit – UX90 with WattNode Sensors

Onset
KIT-UX90-KWH
The HOBO kWh Monitoring Kit combines the convenience and affordability of Onset’s award-winning HOBO UX90 State/Pulse Data Logger with the power of industry-leading WattNode sensors.As one of the industry’s lowest-cost kWh monitoring solutions, the kit gives energy engineers, auditors, building commissioners, and others a simple way to log electric usage...
View
LogBox Wi-Fi - Data Logger...
Product available with different options
Home

LogBox Wi-Fi - Data Logger Wi-Fi

novus
LogBox-WiFi
LogBox Wi-Fi is an IoT device with integrated data logger and Wi-Fi connectivity. It allows monitoring and recording of data remotely, in facilities with Wi-Fi infrastructure. The data can be accessed remotely, wirelessly and centralized through SCADA application, cloud dashboard or by NXperience software. Easy installation and accessibility are...
View
Energy

Chat with us on WhatsApp

English

English

Do you need advice?
Product added to wishlist
Product added to compare.

We use our own and third party cookies to obtain statistical data from our users' browsing and to improve our services. If you accept or continue browsing, we consider that you accept its use.