A estação compacta e robusta, juntamente com o sensor de nível de água não ventilado, permite implantações de condições adversas e monitoramento confiável. O painel solar integrado ou alimentação por bateria opcional, com uma vasta gama de sensores inteligentes plug-and-play, suporta uma monitorização ambiental flexível.
Principais vantagens:
Cálculos de caudal de água pré-programados
Caudal de água e acumulação de precipitação calculados na estação
Alarmes para vazão e chuva no momento da medição
Projeto de estação compacta com um sensor de nível de água não ventilado
Painel solar integrado ou baterias substituíveis pelo usuário
Entradas para até cinco dos sensores inteligentes da Onset
Poderoso acesso aos seus dados através da Web
Visualize e gerencie medições de nível de água, configure alarmes, crie dashboards personalizados e visualize dados atuais e históricos através do software HOBOlink baseado na nuvem da Onset.
Características Destacadas
Alarmes do lado da estação para vazão de água e precipitação acumulada acionados no momento da medição
Sensor de nível de água de cerâmica não ventilada com uma escolha de quatro gamas
Cabos dos sensores de nível de água intercambiáveis, reforçados com Kevlar
Sensor de pressão barométrica integrado
Caixa compacta IP66/NEMA 4X
O LCD integrado confirma a configuração e operação adequadas
Duas opções de energia:
Painel solar integrado de 1,7 W com bateria recarregável
Podem ser adicionados painéis solares externos de 5 W e 15 W (apenas RX2104)
Pilhas de lítio AA substituíveis pelo utilizador
Entradas para cinco sensores inteligentes plug-and-play
Taxas de conexão de até 10 minutos via planos de dados celulares 4G
Monitoramento baseado em nuvem e acesso a dados através do HOBOlink
O registador de dados RX2100-WL suporta as seguintes medições: Pressão absoluta, pressão barométrica, evapotranspiração, humidade foliar, intensidade luminosa, PAR, entrada de impulsos, precipitação, humidade relativa, humidade relativa do solo, temperatura, nível de água e vento
To see the full specifications for this product, please see our product manual found under the documentation tab if available
|
Operating Range
|
RX2103: -40° to 60°C (-40° to 140°F)
RX2104: -20° to 60°C (-4° to 140°F)
|
|
Smart Sensor Connectors
|
5
|
|
Smart Sensor Network Cable Length
|
100 m (328 ft) maximum
|
|
Smart Sensor Data Channels
|
Maximum of 15 (some smart sensors use more than one data channel; see sensor manual for details)
|
|
Logging Rate
|
1 minute to 18 hours
|
|
Time Accuracy
|
±8 seconds per month in 0° to 40°C (32°F to 104°F) range;
±30 seconds per month in -40° to 60°C (-40° to 140°F) range
|
|
Battery Type/Power Source
|
RX2103: 6 AA 1.5 V lithium batteries or AC power adapter (P-AC-1)
RX2104: Integrated 1.7 watt solar panel and NiMH rechargeable battery pack; optional AC power adapter (P-AC-1) or external solar panel (SOLAR-xW) can be used in place of integrated solar panel
|
|
Battery Life
|
RX2103 Battery Life:
Battery life with daily connections:
- RX2103: 1 year with 2 minute logging
Battery life with hourly connections and 1 minute logging:
Note: Deployments in areas with weak cellular strength could reduce battery life.
RX2104 Battery Life:
Typical 3–5 years when operated in the temperature range -20° to 40°C (-4° to 104°F); operation outside this range will reduce the battery service life.
Maximum connection rates with built-in solar panel, in full sun:
- 10 minute connections year round for latitudes less than ±40°
- 10 minute connections through three seasons in other regions, reduced to 30 minute connections in winter
Maximum connection rates with external 5W or 15W solar panels:
- 10 minute connections year round, in full sun
- Connection rate with external solar panels may be less if deployed in partial sun
Battery life without solar recharging, with hourly connections and
1 minute logging:
|
|
Memory
|
16 MB, 1 million measurements, continuous logging
|
|
Alarm Notification Latency
|
Logging interval plus 2–4 minutes, typical
|
|
Enclosure Access
|
Hinged door secured by two latches with eyelets for use with user-supplied padlocks
|
|
LCD
|
LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
|
|
Materials
|
Outer enclosure: Polycarbonate/PBT blend with brass inserts; Interior: Polycarbonate/PBT; Gasket: Silicone foam; Cable channel: Santoprene™ TPE; U-Bolts (not included): Steel with zinc dichromate finish
|
|
Dimensions
|
19.95 x 13.68 x 7.49 cm (7.85 x 5.39 x 2.95 in.)
|
|
Weight
|
678 g (23.9 oz)
|
|
Mounting
|
Optional U-bolts are compatible with masts up to 4.14 cm (1.63 in.) mast diameter; can also be mounted with zip ties or mounted to a flat surface with screws
|
|
Environmental Rating
|
Weatherproof enclosure, NEMA 4X and IP66 (requires proper installation of cable channel system)
|
| Wireless Radio |
GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz
UMTS/HSPA+: Seven band 800/850/900/1800/1900/2100 MHz
LTE: Twelve Band 700/800/850/900/1800/1900/2100/2600 MHz
|
| Antenna |
4G LTE
|
|
|
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)
|
|
 
|
FCC ID QIPPLS62-W, IC ID:7830A-PLS62W
|
Water Level Sensor:
Pressure (Absolute) And Water Level Measurements MX2001-01-S and MX2001-01-Ti-S:
|
Operation Range
|
0 to 207 kPa (0 to 30 psia); approximately 0 to 9 m (0 to 30 ft) of water depth at sea level, or 0 to 12 m (0 to 40 ft) of water at 3,000 m (10,000 ft) of altitude
|
|
Factory Calibrated Range
|
69 to 207 kPa (10 to 30 psia), 0° to 40°C (32° to 104°F)
|
|
Burst Pressure
|
310 kPa (45 psia) or 18 m (60 ft) depth
|
|
Water Level Accuracy*
|
Typical error: ±0.05% FS, 0.5 cm (0.015 ft) water
Maximum error: ±0.1% FS, 1.0 cm (0.03 ft) water
|
|
Raw Pressure Accuracy**
|
±0.3% FS, 0.62 kPa (0.09 psi) maximum error
|
|
Resolution
|
<0.02 kPa (0.003 psi), 0.21 cm (0.007 ft) water
|
|
Pressure Response Time (90%)***
|
<1 second at a stable temperature
|
Pressure (Absolute) And Water Level Measurements MX2001-02-S:
|
Operation Range
|
0 to 400 kPa (0 to 58 psia); approximately 0 to 30.6 m (0 to 100 ft) of water depth at sea level, or 0 to 33.6 m (0 to 111 ft) of water at 3,000 m (10,000 ft) of altitude
|
|
Factory Calibrated Range
|
69 to 400 kPa (10 to 58 psia), 0° to 40°C (32° to 104°F)
|
|
Burst Pressure
|
500 kPa (72.5 psia) or 40.8 m (134 ft) depth
|
|
Water Level Accuracy*
|
Typical error: ±0.05% FS, 1.5 cm (0.05 ft) water
Maximum error: ±0.1% FS, 3.0 cm (0.01 ft) water
|
|
Raw Pressure Accuracy**
|
±0.3% FS, 1.20 kPa (0.17 psi) maximum error
|
|
Resolution
|
<0.04 kPa (0.006 psi), 0.41 cm (0.013 ft) water
|
|
Pressure Response Time (90%)***
|
<1 second at a stable temperature
|
Pressure (Absolute) And Water Level Measurements MX2001-03-S:
|
Operation Range
|
0 to 850 kPa (0 to 123.3 psia); approximately 0 to 76.5 m (0 to 251 ft) of water depth at sea level, or 0 to 79.5 m (0 to 262 ft) of water at 3,000 m (10,000 ft) of altitude
|
|
Factory Calibrated Range
|
69 to 850 kPa (10 to 123.3 psia), 0° to 40°C (32° to 104°F)
|
|
Burst Pressure
|
1,200 kPa (174 psia) or 112 m (368 ft) depth
|
|
Water Level Accuracy*
|
Typical error: ±0.05% FS, 3.8 cm (0.125 ft) water
Maximum error: ±0.1% FS, 7.6 cm (0.25 ft) water
|
|
Raw Pressure Accuracy**
|
±0.3% FS, 2.55 kPa (0.37 psi) maximum error
|
|
Resolution
|
<0.085 kPa (0.012 psi), 0.87 cm (0.028 ft) water
|
|
Pressure Response Time (90%)***
|
<1 second at a stable temperature
|
Pressure (Absolute) And Water Level Measurements MX2001-04-S and MX2001-04-Ti-S:
|
Operation Range
|
0 to 145 kPa (0 to 21 psia); approximately 0 to 4 m (0 to 13 ft) of water depth at sea level, or 0 to 7 m (0 to 23 ft) of water at 3,000 m (10,000 ft) of altitude
|
|
Factory Calibrated Range
|
69 to 145 kPa (10 to 21 psia), 0° to 40°C (32° to 104°F)
|
|
Burst Pressure
|
310 kPa (45 psia) or 18 m (60 ft) depth
|
|
Water Level Accuracy*
|
Typical error: ±0.075% FS, 0.3 cm (0.01 ft) water
Maximum error: ±0.15% FS, 0.6 cm (0.02 ft) water
|
|
Raw Pressure Accuracy**
|
±0.3% FS, 0.43 kPa (0.63 psi) maximum error
|
|
Resolution
|
<0.014 kPa (0.002 psi), 0.14 cm (0.005 ft) water
|
|
Pressure Response Time (90%)***
|
<1 second at a stable temperature
|
Barometric Pressure (RX2103 and RX2104 station):
|
Operation Range
|
66 to 107 kPa (9.57 to 15.52 psia)
|
|
Temperature Calibrated Range
|
-20 to 50°C (-4 to 122°C)
|
|
Accuracy
|
±0.2 kPa (±0.029 psi) over full temperature range at fixed pressure; maximum error ±0.5% FS
|
|
Water Level Accuracy*
|
Typical error: ±0.075% FS, 0.3 cm (0.01 ft) water
Maximum error: ±0.15% FS, 0.6 cm (0.02 ft) water
|
|
Resolution
|
<0.01 kPa (0.0015 psi)
|
|
Response Time
|
<1 second at a stable temperature
|
| Stability (Drift) |
0.1°C (0.18°F) per year |
Temperature (Water Level Sensors MX2001-0x-S and MX2001-0x-Ti-S):
|
Operation Range
|
-20° to 50°C (-4° to 122°F)
|
|
Accuracy
|
±0.44°C from 0° to 50°C (±0.79°F from 32° to 122°F)
|
|
Resolution
|
0.1°C at 25°C (0.18°F at 77°F)
|
|
Response Time (90%)
|
5 minutes in water (typical)
|
| Stability (Drift) |
0.1°C (0.18°F) per year |
* Water Level Accuracy: With accurate reference water level measurement, known water density, and a stable temperature environment. System Water Level Accuracy equals the sum of the Barometric Water Level Accuracy plus the selected sensor Water Level Accuracy.
** Raw Pressure Accuracy: Absolute pressure sensor accuracy includes all sensor drift, temperature, and hysteresis-induced errors.
*** Changes in Temperature: Allow 20 minutes in water to achieve full temperature compensation of the pressure sensor. There can be up to 0.5% of additional error due to rapid temperature changes.
Measurement accuracy also depends on temperature response time.
