Los nuevos cálculos de caudal de agua y de precipitaciones acumuladas, que se realizan directamente en la estación en el momento de la medición, activan notificaciones inmediatas de las condiciones críticas del nivel de agua.
La estación compacta y robusta, junto con el sensor de nivel de agua no ventilado, permite despliegues en condiciones difíciles y una monitorización fiable. El panel solar integrado opcional o la alimentación por batería, con una amplia gama de sensores inteligentes "plug-and-play", permiten un control ambiental flexible.
Ventajas clave:
Cálculos de caudal de agua preprogramados
Flujo de agua y acumulación de precipitaciones calculados en la estación
Alarmas de caudal y lluvia en el momento de la medición
Diseño compacto de la estación con un sensor de nivel de agua sin ventilación
Panel solar integrado o baterías reemplazables por el usuario
Entradas para hasta cinco de los sensores inteligentes de Onset
Potente Acceso a los Datos Basado en la Web
Vea y administre mediciones de nivel de agua, configure alarmas, cree cuadros de mando personalizados y vea datos actuales e históricos a través del software HOBOlink de Onset basado en la nube.
Características destacadas
Alarmas del lado de la estación para el caudal de agua y las precipitaciones acumuladas que se activan en el momento de la medición.
Sensor de nivel de agua cerámico no ventilado con cuatro gamas a elegir
Cables de sensores de nivel de agua intercambiables reforzados con Kevlar
Sensor de presión barométrica integrado
Carcasa compacta IP66/NEMA 4X
La pantalla LCD incorporada confirma la configuración y el funcionamiento correctos
Dos opciones de energía:
Panel solar integrado de 1,7 W con batería recargable
Se pueden añadir paneles solares externos de 5 W y 15 W (sólo RX2104)
Baterías de litio AA reemplazables por el usuario
Entradas para cinco sensores inteligentes plug-and-play
Velocidades de conexión de hasta 10 minutos a través de planes de datos celulares 4G
Monitoreo basado en la nube y acceso a datos a través de HOBOlink
El registrador de datos RX2100-WL soporta las siguientes mediciones: Presión Absoluta, Presión Barométrica, Evapotranspiración, Humedad de la Hoja, Intensidad de la Luz, PAR, Entrada de Pulso, Lluvia, Humedad Relativa, Humedad del Suelo, Temperatura, Nivel de Agua y Viento.
To see the full specifications for this product, please see our product manual found under the documentation tab if available
|
Operating Range
|
RX2103: -40° to 60°C (-40° to 140°F)
RX2104: -20° to 60°C (-4° to 140°F)
|
|
Smart Sensor Connectors
|
5
|
|
Smart Sensor Network Cable Length
|
100 m (328 ft) maximum
|
|
Smart Sensor Data Channels
|
Maximum of 15 (some smart sensors use more than one data channel; see sensor manual for details)
|
|
Logging Rate
|
1 minute to 18 hours
|
|
Time Accuracy
|
±8 seconds per month in 0° to 40°C (32°F to 104°F) range;
±30 seconds per month in -40° to 60°C (-40° to 140°F) range
|
|
Battery Type/Power Source
|
RX2103: 6 AA 1.5 V lithium batteries or AC power adapter (P-AC-1)
RX2104: Integrated 1.7 watt solar panel and NiMH rechargeable battery pack; optional AC power adapter (P-AC-1) or external solar panel (SOLAR-xW) can be used in place of integrated solar panel
|
|
Battery Life
|
RX2103 Battery Life:
Battery life with daily connections:
- RX2103: 1 year with 2 minute logging
Battery life with hourly connections and 1 minute logging:
Note: Deployments in areas with weak cellular strength could reduce battery life.
RX2104 Battery Life:
Typical 3–5 years when operated in the temperature range -20° to 40°C (-4° to 104°F); operation outside this range will reduce the battery service life.
Maximum connection rates with built-in solar panel, in full sun:
- 10 minute connections year round for latitudes less than ±40°
- 10 minute connections through three seasons in other regions, reduced to 30 minute connections in winter
Maximum connection rates with external 5W or 15W solar panels:
- 10 minute connections year round, in full sun
- Connection rate with external solar panels may be less if deployed in partial sun
Battery life without solar recharging, with hourly connections and
1 minute logging:
|
|
Memory
|
16 MB, 1 million measurements, continuous logging
|
|
Alarm Notification Latency
|
Logging interval plus 2–4 minutes, typical
|
|
Enclosure Access
|
Hinged door secured by two latches with eyelets for use with user-supplied padlocks
|
|
LCD
|
LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
|
|
Materials
|
Outer enclosure: Polycarbonate/PBT blend with brass inserts; Interior: Polycarbonate/PBT; Gasket: Silicone foam; Cable channel: Santoprene™ TPE; U-Bolts (not included): Steel with zinc dichromate finish
|
|
Dimensions
|
19.95 x 13.68 x 7.49 cm (7.85 x 5.39 x 2.95 in.)
|
|
Weight
|
678 g (23.9 oz)
|
|
Mounting
|
Optional U-bolts are compatible with masts up to 4.14 cm (1.63 in.) mast diameter; can also be mounted with zip ties or mounted to a flat surface with screws
|
|
Environmental Rating
|
Weatherproof enclosure, NEMA 4X and IP66 (requires proper installation of cable channel system)
|
| Wireless Radio |
GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz
UMTS/HSPA+: Seven band 800/850/900/1800/1900/2100 MHz
LTE: Twelve Band 700/800/850/900/1800/1900/2100/2600 MHz
|
| Antenna |
4G LTE
|
|
|
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)
|
|
 
|
FCC ID QIPPLS62-W, IC ID:7830A-PLS62W
|
Water Level Sensor:
Pressure (Absolute) And Water Level Measurements MX2001-01-S and MX2001-01-Ti-S:
|
Operation Range
|
0 to 207 kPa (0 to 30 psia); approximately 0 to 9 m (0 to 30 ft) of water depth at sea level, or 0 to 12 m (0 to 40 ft) of water at 3,000 m (10,000 ft) of altitude
|
|
Factory Calibrated Range
|
69 to 207 kPa (10 to 30 psia), 0° to 40°C (32° to 104°F)
|
|
Burst Pressure
|
310 kPa (45 psia) or 18 m (60 ft) depth
|
|
Water Level Accuracy*
|
Typical error: ±0.05% FS, 0.5 cm (0.015 ft) water
Maximum error: ±0.1% FS, 1.0 cm (0.03 ft) water
|
|
Raw Pressure Accuracy**
|
±0.3% FS, 0.62 kPa (0.09 psi) maximum error
|
|
Resolution
|
<0.02 kPa (0.003 psi), 0.21 cm (0.007 ft) water
|
|
Pressure Response Time (90%)***
|
<1 second at a stable temperature
|
Pressure (Absolute) And Water Level Measurements MX2001-02-S:
|
Operation Range
|
0 to 400 kPa (0 to 58 psia); approximately 0 to 30.6 m (0 to 100 ft) of water depth at sea level, or 0 to 33.6 m (0 to 111 ft) of water at 3,000 m (10,000 ft) of altitude
|
|
Factory Calibrated Range
|
69 to 400 kPa (10 to 58 psia), 0° to 40°C (32° to 104°F)
|
|
Burst Pressure
|
500 kPa (72.5 psia) or 40.8 m (134 ft) depth
|
|
Water Level Accuracy*
|
Typical error: ±0.05% FS, 1.5 cm (0.05 ft) water
Maximum error: ±0.1% FS, 3.0 cm (0.01 ft) water
|
|
Raw Pressure Accuracy**
|
±0.3% FS, 1.20 kPa (0.17 psi) maximum error
|
|
Resolution
|
<0.04 kPa (0.006 psi), 0.41 cm (0.013 ft) water
|
|
Pressure Response Time (90%)***
|
<1 second at a stable temperature
|
Pressure (Absolute) And Water Level Measurements MX2001-03-S:
|
Operation Range
|
0 to 850 kPa (0 to 123.3 psia); approximately 0 to 76.5 m (0 to 251 ft) of water depth at sea level, or 0 to 79.5 m (0 to 262 ft) of water at 3,000 m (10,000 ft) of altitude
|
|
Factory Calibrated Range
|
69 to 850 kPa (10 to 123.3 psia), 0° to 40°C (32° to 104°F)
|
|
Burst Pressure
|
1,200 kPa (174 psia) or 112 m (368 ft) depth
|
|
Water Level Accuracy*
|
Typical error: ±0.05% FS, 3.8 cm (0.125 ft) water
Maximum error: ±0.1% FS, 7.6 cm (0.25 ft) water
|
|
Raw Pressure Accuracy**
|
±0.3% FS, 2.55 kPa (0.37 psi) maximum error
|
|
Resolution
|
<0.085 kPa (0.012 psi), 0.87 cm (0.028 ft) water
|
|
Pressure Response Time (90%)***
|
<1 second at a stable temperature
|
Pressure (Absolute) And Water Level Measurements MX2001-04-S and MX2001-04-Ti-S:
|
Operation Range
|
0 to 145 kPa (0 to 21 psia); approximately 0 to 4 m (0 to 13 ft) of water depth at sea level, or 0 to 7 m (0 to 23 ft) of water at 3,000 m (10,000 ft) of altitude
|
|
Factory Calibrated Range
|
69 to 145 kPa (10 to 21 psia), 0° to 40°C (32° to 104°F)
|
|
Burst Pressure
|
310 kPa (45 psia) or 18 m (60 ft) depth
|
|
Water Level Accuracy*
|
Typical error: ±0.075% FS, 0.3 cm (0.01 ft) water
Maximum error: ±0.15% FS, 0.6 cm (0.02 ft) water
|
|
Raw Pressure Accuracy**
|
±0.3% FS, 0.43 kPa (0.63 psi) maximum error
|
|
Resolution
|
<0.014 kPa (0.002 psi), 0.14 cm (0.005 ft) water
|
|
Pressure Response Time (90%)***
|
<1 second at a stable temperature
|
Barometric Pressure (RX2103 and RX2104 station):
|
Operation Range
|
66 to 107 kPa (9.57 to 15.52 psia)
|
|
Temperature Calibrated Range
|
-20 to 50°C (-4 to 122°C)
|
|
Accuracy
|
±0.2 kPa (±0.029 psi) over full temperature range at fixed pressure; maximum error ±0.5% FS
|
|
Water Level Accuracy*
|
Typical error: ±0.075% FS, 0.3 cm (0.01 ft) water
Maximum error: ±0.15% FS, 0.6 cm (0.02 ft) water
|
|
Resolution
|
<0.01 kPa (0.0015 psi)
|
|
Response Time
|
<1 second at a stable temperature
|
| Stability (Drift) |
0.1°C (0.18°F) per year |
Temperature (Water Level Sensors MX2001-0x-S and MX2001-0x-Ti-S):
|
Operation Range
|
-20° to 50°C (-4° to 122°F)
|
|
Accuracy
|
±0.44°C from 0° to 50°C (±0.79°F from 32° to 122°F)
|
|
Resolution
|
0.1°C at 25°C (0.18°F at 77°F)
|
|
Response Time (90%)
|
5 minutes in water (typical)
|
| Stability (Drift) |
0.1°C (0.18°F) per year |
* Water Level Accuracy: With accurate reference water level measurement, known water density, and a stable temperature environment. System Water Level Accuracy equals the sum of the Barometric Water Level Accuracy plus the selected sensor Water Level Accuracy.
** Raw Pressure Accuracy: Absolute pressure sensor accuracy includes all sensor drift, temperature, and hysteresis-induced errors.
*** Changes in Temperature: Allow 20 minutes in water to achieve full temperature compensation of the pressure sensor. There can be up to 0.5% of additional error due to rapid temperature changes.
Measurement accuracy also depends on temperature response time.
