U30 USB Registrador de Datos (hasta 15 canales)

U30-NRC

Esta robusta estación meteorológica es la solución de monitorización ambiental exterior más robusta de Onset. Los usuarios pueden configurar fácilmente la Estación Meteorológica HOBO U30-NRC para que se ajuste a sus necesidades de aplicación. Puede utilizar hasta 15 canales para registrar datos medioambientales y, a continuación, cargarlos en el software HOBOware® para su análisis. HOBOware Pro se recomienda para las funciones ampliadas, vea la comparación aquí. El U30-NRC dispone de cuatro sistemas configurables, que se pueden configurar a continuación, y que constan de los siguientes números de pieza: U30-NRC-000-05-S100-000, U30-NRC-000-10-S100-000, U30-NRC-VIA-05-S100-000 y U30-NRC-VIA-10-S100-000.

Características destacadas


    Todos los componentes electrónicos están alojados en una carcasa robusta a prueba de manipulaciones y de doble resistencia a la intemperie.
    La configuración es rápida y sencilla con los sensores plug-and-play
    Rápida descarga de datos a través de USB
    Entradas analógicas opcionales con opción para excitar sensores externos (12Vdc@50mA)
    Incluye relé que puede activarse en condiciones de alarma definidas por el usuario.

El registrador de datos U30-NRC soporta las siguientes mediciones: 4-20mA, Corriente AC, Voltaje AC, Velocidad del aire, Amperios hora (Ah), Amperios (A), Presión barométrica, Dióxido de carbono, Caudal de aire comprimido, Corriente DC, Voltaje DC, Presión diferencial, Presión manométrica, Kilovatios hora (kWh), Kilovatios (kW), Humedad de la hoja, Intensidad de luz, Factor de potencia (PF), Entrada de pulso, Lluvia, Humedad relativa, Humedad relativa, Humedad del suelo, Temperatura, Compuesto orgánico volátil, Voltios-Amperios Reactivos, Voltios-Amperios Reactivos, Voltios-Amperios (VA), Voltios (V), Caudal de Agua, Nivel de Agua, Vatios-Horas (Wh), Vatios (W) y Viento.

Specifications

Normal operating range: -20°C to 40°C (-4°F to 104°F)
Extended operating range: -40 to 60°C (-40 to 140°F) - see "Rechargeable Battery service Life" for impact of operations in Extended Operating Range.
Sensor Inputs: 5 standard; option to expand to 10
Smart Sensor compatibility: Compatible with most Onset smart sensors, except for the S-BPA, S-TMA and S-THA
Data channels: Maximum of 15 (some sensors use more than one data channel)
Alarm output relay: Can be configured to be activated, deactivated or pulsed on user-defined sensor alarms. The relay can be configured as normally open or normally closed, and is rated for 30 V and 1 amp max.
Expansion slot: One expansion slot is available for factory-installed expansion port.
Local communication: Full Speed USB via USB mini-B connector
Size: 17.8 H x 11.7 D x 19.3 W cm (7.0 H x 4 .6 D x 7.6 W inches)
Weight: 2 kg (4 lbs 10 oz)

Materials:
Outer enclosure: ABS blend with stainless steel hinge pins and bronze inserts
Inner enclosure: Polycarbonate with bronze inserts
U-Bolts: Steel with zinc dichromate finish
Gaskets: Silicone rubber
Cable entry channel: EPDM rubber
Cable entry bars: Aluminum with ABS plastic thumb screws

Data storage memory: Nonvolatile flash data storage, 512K bytes local storage
Memory modes: Stop when full, wrap around when full
Operational indicators: Up to six (depending upon options) status lights provide basic diagnostics
Logging interval: 1 second to 18 hours, user-specified interval
Battery type: 4 Volt, 4.5 AHr or 10 AHr, Rechargeable sealed lead-acid
Rechargeable battery service life: Typical 3–5 years depending upon conditions of use. Operation within the extended operating range (but outside the normal range) will reduce battery service life.
Time accuracy: 0 to 2 seconds for the first data point and ±5 seconds per week at 25°C (77°F)
Environmental rating: Weatherproof enclosure, tested to NEMA 6. (Requires proper installation of cable channel system)
Mounting: 3.8 cm (1.5 inch) mast or wall mount
Enclosure access: Hinged door secured by two latches with eyelets for securing with user-supplied padlocks
Sensor network cable length: 100 m (328 ft) maximum
External power: External power is required. The system optionally accepts the following Onset solar panels:SOLAR-1.2W, SOLAR-3W, SOLAR-6W. Alternatively it accepts an AC power adapter:AC-U30

Optional Analog Sensor Port Specifications
Input channels: Two, single-ended
Field wiring: Two- or three-wire via screw terminals on detachable connector, 16–24 AWG. 
Replacement detachable connectors: Part of spares kit, Part No. A-FS-CVIA-7P-1
Input range: User-configurable: 0–20 mA DC, 0-2.5 VDC, 0-5 VDC, 0-10 VDC, or 0–20 VDC
Minimum/maximum input voltage: 0 / 24 VDC
Minimum/maximum input current: 0 / 24 mA DC
Minimum current source impedance: > 20 KΩ
Accuracy: ± 0.25% of FSR from 50mV to FSV
ADC resolution: 12 bits
Excitation power: Switched 12 VDC, up to 50 mA; user-selectable warm-up from 5msec to 2 minutes

También podría interesarle

Product added to wishlist
Product added to compare.

Utilizamos cookies propias y de terceros para obtener datos estadísticos de la navegación de nuestros usuarios y mejorar nuestros servicios. Si acepta o continúa navegando, consideramos que acepta su uso.