Split-core AC current...
Product available with different options
Home

Split-core AC current Sensor ( Available in 5 ranges - 20, 50, 100, 200 & 600 Amps)

Onset
CTV-x
A split-core AC current sensor records AC amperage for use with U12 Series, UX120-006M and ZW Series of data loggers with external input channels. With an input current of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag.The molded-plastic housing is rated for indoor use per UL508.
RX3000 4-channel Analog Module RX3000 4-channel Analog Module 2
Product available with different options
Home

RX3000 4-channel Analog Module

Onset
RXMOD-A1
The optional analog module has four analog inputs that support excitation power, scaling, and statistics measurements.  These four, single-ended sensor inputs are configured through HOBOlink. A HOBO RX3000 is required for this product.
Antifouling Protective...
Product available with different options
Home

Antifouling Protective Guard - U26-GUARD-2

Onset
U26-GUARD-2
The Anti-fouling Protective Guard can be used in place of the standard protective guard for protection against fouling during deployment. The anti-fouling guard uses copper windings to reduce bio-fouling, while still allowing good water flow to the sensor.
Replacement DO Sensor Cap -...
Product available with different options
Home

Replacement DO Sensor Cap - U26-RDOB-1

Onset
U26-RDOB-1
The Replacement DO Sensor Cap replaces the original DO sensor cap that’s included with the HOBO DO Data Logger. The DO sensor caps have a 6-month deployment life. (The caps expire 7 months after initialization to allow some time before and after the deployment.) The caps have a 2-year shelf-life from the date they were manufactured. (Shelf-life shown on...
AP-5000 – Advanced portable... AP-5000 – Advanced portable... 2
Product available with different options
Home

AP-5000 – Advanced portable multi-parameter Aquaprobe

Aquaread
AP-5000
The AP-5000 is the larger of our advanced portable multiparameter water monitoring probes. It comes with a range of standard sensors included, and much like its smaller counterpart it offers more customisation options that allow you to add extra sensors to the probe. All of our probes are constructed from tough marine grade aluminium that has been hard...
Cámara inalámbrica de...
Product available with different options
Home

Cámara inalámbrica de vigilancia integrada con panel solar

EIC2303B
EIC2303B sistema de cámaras de seguridad de alta resolución de vigilancia de sitios remotos diseñado para ser utilizado en el lugar donde no hay energía eléctrica. Funciona con paneles solares, comunicación por GSM, 3G y 4G.
Tablet PC industrial... Tablet PC industrial... 2
Product available with different options
Home

Tablet PC industrial Android 7.1 de 8" con lector RFID

EIC927
La EIC907V3.0-HG es una poderosa tableta industrial. Con el mejor rendimiento de la batería posible, así como las opciones de captura de datos integrales, incluido el escaneo 1D / 2D de alto rendimiento, lectura de RFID LF / HF / NFC / UHF, este dispositivo fácil de usar ofrece un ayudante de gran valor para aumentar la eficiencia y productividad en el...
USB Interface Cable(s)
Product available with different options
Home

USB Interface Cable(s)

Onset
ADAPT-SER-USB
A Keyspan USB-to-serial adaptor for use with all RS-232 serial devices and a PC 3.5 Interface Cable for PC computers.
Rogowski Coil Sensor...
Product available with different options
Home

Rogowski Coil Sensor (T-EG-4000-2775 and T-EG-7000-2775)

Onset
T-EG-x000-2775
Rope CTs are excellent for bus-bars and large switch-gear applications. Self-powered rope CTs are flexible and easy to install, but will not be accurate below 30A. Each CT includes the two-pin CT connector plug.
0 to 24 VoltsDC Voltage...
Product available with different options
Home

0 to 24 VoltsDC Voltage Input Sensor

Onset
CABLE-ADAP24
The CABLE-ADAP24 is an external input cable providing analog sensor input of 0-24 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length 1.9m (6.3 ft.).
0 to 10 VoltsDC Voltage...
Product available with different options
Home

0 to 10 VoltsDC Voltage Input Sensor

Onset
CABLE-ADAP10
The CABLE-ADAP10 is an external input cable providing analog sensor input of 0-10 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm tinned braided wire leads and a total length 1.9m.
0 to 5 VoltsDC Voltage...
Product available with different options
Home

0 to 5 VoltsDC Voltage Input Sensor

Onset
CABLE-ADAP5
The CABLE-ADAP5 is an external input cable providing analog sensor input of 0-5 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm tinned braided wire leads and a total length 1.9m.
0 to 2.5 VoltsDC Voltage...
Product available with different options
Home

0 to 2.5 VoltsDC Voltage Input Sensor

Onset
CABLE-2.5-STEREO
An external input cable with 13mm tinned braided wire leads. Voltage input specifications vary with attached data logger.Overall length of this cable is 1.8m.
HOBO Water Temperature Pro... HOBO Water Temperature Pro... 2
Product available with different options
Home

HOBO Water Temperature Pro v2 Data Logger (Waterproof to 120 m)

Onset
U22-001
The HOBO Water Temp Pro v2 is durable with 12-bit resolution. Complete with a precision sensor for ±0.2°C accuracy, this logger measures temperatures between -40°C and 70°C in air and up to 50°C in water. Its waterproof, streamlined case allows for extended deployment in fresh or salt water. Moreover, the Water Temp Pro v2’s optical USB interface makes it...

Chat with us on WhatsApp

Product added to wishlist
Product added to compare.

We use our own and third party cookies to obtain statistical data from our users' browsing and to improve our services. If you accept or continue browsing, we consider that you accept its use.