12-bit Voltage Input...
Available
Home

12-bit Voltage Input Adapter Sensor

Onset
S-VIA-CM14
€76.00
The 12-bit Voltage Input Adapter interfaces with sensors providing 0-5 VDC signals to act as a smart sensor with compatible data loggers. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external batteries. It also provides a trigger signal for controlling power to attached external sensors,...
Solar Radiation (Silicon...
Product available with different options
Home

Solar Radiation (Silicon Pyranometer) Smart Sensor

Onset
S-LIB-M003
Effectively measure light levels with this silicon pyranometer sensor. The Solar Radiation Smart Sensor enables rapid deployment. Since HOBO data loggers recognize this sensor, no complicated programming or setup is required. This product offers a measurement range of 0 to 1280 W/m2 over a spectral range of 300 to 1100 nm. A measurement averaging mode is...
View
Electronic Switch Pulse...
Available
Home

Electronic Switch Pulse Input Adapter - 1m Sensor

Onset
S-UCC-M001
€72.00
The Electronic Switch Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a maximum input frequency of 120 Hz (120 pulses per second).
Contact Closure Pulse Input...
Available
Home

Contact Closure Pulse Input Adapter - 1 meter Sensor

Onset
S-UCD-M001
€72.00
The Contact Closure Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This smart sensor is compatible with contact closures, such as tipping-bucket rain gauges or reed switches with a maximum input frequency of 2 Hz (2 pulses per second), and a preferred switch-type of normally-open.
Contact Closure Pulse Input...
Product available with different options
Home

Contact Closure Pulse Input Adapter - 6 meters Sensor

Onset
S-UCD-M006
The Contact Closure Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This smart sensor is compatible with contact closures, such as tipping-bucket rain gauges or reed switches with a maximum input frequency of 2 Hz (2 pulses per second), and a preferred switch-type of normally-open.
View
MX2500 Replacement Electrode
Product available with different options
Home

MX2500 Replacement Electrode

Onset
MX2500-ELECTRODE
With its gel electrolyte and double Pellon® junction minimizing the chance of contamination of the reference electrolyte, this plastic-bodied electrode and the HOBO MX2501 pH and Temperature Data Logger are perfectly suited for environmental monitoring of streams, lakes, rivers, estuaries, and oceans. The electrode uses potentiometric and temperature...
View
MX2500 Anti-Biofouling...
Product available with different options
Home

MX2500 Anti-Biofouling Copper Guard

Onset
MX2500-GUARD
The Anti-Biofouling Copper Guard can be used in addition to the standard electrode guard for protection against biofouling during deployment. The anti-biofouling guard uses copper to reduce biofouling, while still allowing proper water flow to the sensor.
View
MX2500 End Cap
Product available with different options
Home

MX2500 End Cap

Onset
MX2500-END-CAP
The replacement sensor end cap replaces the original sensor end cap that ships with the HOBO MX pH Logger.
View
MX2500 Electrode Storage Cap
Product available with different options
Home

MX2500 Electrode Storage Cap

Onset
MX2500-STORE-CAP
The electrode storage cap is used to protect the pH electrode in the HOBO MX pH Logger, as well as to properly store the electrode in proper pH storage solution (MX2500-STORE-SOLN). The storage cap has the added benefit of being able to be used for field calibrations.
View
MX2500 Calibration Beaker
Product available with different options
Home

MX2500 Calibration Beaker

Onset
MX2500-CAL-BKR
The 118,29mm calibration beaker can be used to calibrate the HOBO MX pH Logger and to store calibration solutions.
View
pH Calibration Solutions...
Available
Home

pH Calibration Solutions (475 mL ea.)

Onset
MX2500-CAL-xx
€0.00
The pH 4.01, 7.00, and 10.00 Calibration Solutions (475 mL bottles) are used to calibrate the pH electrode in the HOBO MX pH Logger.
MX2500 Electrode Storage...
Available
Home

MX2500 Electrode Storage Solution (475 mL)

Onset
MX2500-STORE-SOLN
€0.00
The Electrode Storage Solution is used to properly store and condition the pH electrode that is used with the HOBO MX pH Logger. The purpose of the storage solution is to maintain the hydrated gel layer that is integral to accurate pH readings.
Compliance Certification
Available
Home

Compliance Certification

Onset
COMPLIANCE CERT
€25.00
This compliance certificate states that the individual data logger is in compliance with its specification as described in its product manual and has passed all applicable tests.
EIC400-04 Economical...
Available
Home

EIC400-04 Economical Tipping Bucket Rainfall Sensor

EIC400-04
€150.00
EIC400-04 Economical Tipping Bucket Rainfall Sensor is a hydrology, meteorological instrument used to measure the nature of rainfall, and it converts the precipitation into a pulse signal output. Designed with insect-proof nets, free blocking nozzle and built-in leveller. The model can be used in meteorology, hydrology, agriculture, forestry, field...
Davis® 0.2 mm Rain Gauge... Davis® 0.2 mm Rain Gauge... 2
Product available with different options
Home

Davis® 0.2 mm Rain Gauge Smart Sensor

Onset
S-RGF-M002
The Davis® Rain Gauge Smart Sensors features the new AeroCone® design, for better measurement accuracy in high-wind conditions. This gauge is made from UV-stabilized ABS plastic to provide a cost-effective sensor for rainfall measurement, and is plug-and-play compatible with all HOBO weather stations.Also available in a wireless model for use with the...
View
EC5 Soil Moisture Smart...
Product available with different options
Home

EC5 Soil Moisture Smart Sensor - Small area of influence

Onset
S-SMC-M005
This affordably-priced soil moisture sensor offers a two-tine design for easy installation. In addition, the EC-5 is a smart sensor, allowing users to launch monitoring systems quickly, easily, and affordably. Since HOBO data loggers recognize this sensor, no complicated programming or setup is required. The EC-5 integrates with the field-proven ECH2O™...
View
10HS Soil Moisture Smart...
Product available with different options
Home

10HS Soil Moisture Smart Sensor - Large area of influence

Onset
S-SMD-M005
Measure soil moisture over a large volume of soil with the affordably-priced 10HS Soil Moisture Smart Sensor. This sensor integrates the field-proven 10HS Sensor and a 12-bit A/D, providing ±3% accuracy in most soils conditions, and ±2% accuracy with soil-specific calibration. The 10cm probes measure soil moisture over a larger volume of soil, helping to...
View
Home

Chat with us on WhatsApp

English

English

Do you need advice?
Product added to wishlist
Product added to compare.

We use our own and third party cookies to obtain statistical data from our users' browsing and to improve our services. If you accept or continue browsing, we consider that you accept its use.