Temperature (1,8m) Sensor -...
Product available with different options
Home

Temperature (1,8m) Sensor - for be mounted to a pipe or flat surface

Onset
TMC6-HE
A faster response version of our TMC6-HD complete with a plated copper sensor probe that can be mounted to a pipe or flat surface. The sensor is packaged with its own accessories for either strapping to a pipe or attaching to a flat surface.  For use with HOBO U-Series, UX120-006M external-channel data loggers or ZW series wireless datanodes.
View
Stainless Steel Temperature...
Available
Home

Stainless Steel Temperature Probe (1,8m cable) Sensor

Onset
TMC6-HC
€85.00
A food-grade stainless-steel temperature probe with pointed tip for use with HOBO U-Series, UX120-006M external-channel data loggers or ZW series wireless datanodes. Accuracy and resolution vary according with attached logger model. Measurement range is -40° to 100°C in air or water; response time is 3 minutes typical to 90% in air moving 1m/sec (2.2mph);...
U2X Protective Housing U2X Protective Housing 2
Available
Home

U2X Protective Housing

Onset
HOUSING-U2X
€55.00
The U2X Housing is a protective enclosure for mounting Onset's HOBO® U24 conductivity and HOBO U20 water level data loggers. The U2X housing is designed to allow a data logger to be mounted in harsh environments while not restricting the flow of media around the device. Supplied with six zip ties and mounting recommendations, it allows for easy deployment...
Thermochron iButton Data...
Product available with different options
Home

Thermochron iButton Data Logger (-40°C to +85°C )

Maxim Integrated
DS1921G
The DS1921G Thermochron iButton is a rugged, self-sufficient system that measures temperature and records the result in a protected memory section. The recording is done at a user-defined rate, both as a direct storage of temperature values as well as in the form of a histogram. Up to 2048 temperature values taken at equidistant intervals ranging from 1...
View
5 Watt Solar Panel Power 5 Watt Solar Panel Power 2
Product available with different options
Home

5 Watt Solar Panel Power

Onset
SOLAR-5W
This solar panel is suitable for most locations. Includes 45-degree bracket for mast mounting
View
15 Watt Solar Panel Power 15 Watt Solar Panel Power 2
Product available with different options
Home

15 Watt Solar Panel Power

Onset
SOLAR-15W
This solar panel is suitable for most locations. Includes 45-degree bracket for mast mounting
View
Solar Radiation Shield
Product available with different options
Home

Solar Radiation Shield

Onset
RS1
The solar radiation shield is recommended for temperature and relative humidity measurement accuracy in locations exposed to direct or reflected solar radiation. Mounts on tripods, masts, or flat vertical surfaces. The RS1 is ideal for use with loggers such as the HOBO MX2300, HOBO Pendant and U-Series data loggers. The following loggers require mounting...
View
Odyssey® Conductivity &...
Product available with different options
Home

Odyssey® Conductivity & Temperature Logger

DataFlow-Systems
EIC-ODYCT
The Odyssey® Conductivity and Temperature recorder encapsulates both the logger and sensors in one water proof housing. The salinity of free water is measured by induction where the conductivity alters the signal coupling between two sensor elements. At the same time temperature measurements are taken in order to calculate the specific conductivity.Both...
View
No-lead Water Flow Meter...
Product available with different options
Home

No-lead Water Flow Meter Sensor

Onset
T-MINOL-130-NL
Measure cold and hot water flow rates with this compact, affordable water meter. The small-sized T-MINOL-130-NL is designed for deployment in apartments, assisted living communities, and other commercial buildings. Please note, the T-MINOL is configured for use with 3/4" pipes. (Use step-ups or step-downs to deploy the T-MINOL with 1/2" or 1" pipe...
View
HWS 3m Tripod Tower with mast
Available
Home

HWS 3m Tripod Tower with mast

Onset
M-TPA
€0.00
3-meter tripod with mast used for mounting loggers and other sensors in a weather station application. Can be placed on any slope less than 13 degrees. (Cross arms, data logger, sensors, and radiation shield sold separately.)
HWS 2m Tripod Tower with mast
Available
Home

HWS 2m Tripod Tower with mast

Onset
M-TPB
€0.00
2-meter tripod with mast used for mounting loggers and other sensors in a weather station application. This tripod is not adjustable for sloping surfaces. (Cross arms, data logger, sensors, and radiation shield sold separately.)
Light Sensor Bracket
Product available with different options
Home

Light Sensor Bracket

Onset
M-LBB
The light sensor bracket is designed for use with tripods, masts, or flat surfaces. Use to avoid obstructions and shadows that could affect your PAR or solar radiation measurements. Includes leveling screws.
View
NDVI Light Sensor Bracket
Product available with different options
Home

NDVI Light Sensor Bracket

Onset
M-NDVI
NDVI Bracket. This bracket is used to mount two PAR sensors (Part# S-LIA-M003) and two solar radiation sensors (Part# S-LIB-M003) on the Light Sensor Bracket (Part# M-LBB) for making the measurements needed to calculate the Normalized Difference Vegetation Index (NDVI).NDVI monitoring systems are used to provide ground-based verification of satellite NDVI...
View
Multi-channel Handheld... Multi-channel Handheld... 2
Product available with different options
Home

Multi-channel Handheld Thermocouple Temperature Data Logger

EICS220-T8
Thermocouple temperature data logger is a kind of high precision instrument which have pass all strict calibrations and professional testing via FLUKE instrument. Support 8 types thermocouples( K,J,E,T,R,S,N ,B), including thermocouple temperature compensation function and can measure temperature from -200 to 1800℃.
View
Fixed Gas Detector
Product available with different options
Home

Fixed Gas Detector

EIC-2860
EIC-2860 fixed gas detector adopts advanced catalytic gas sensor or electrochemical sensor, which can translate the gas concentration in the air to the digital signal output. The detector working with gas controller can be used to detect gas in refinery, chemical plant, LPG station, boiler room, painting plant and other places with gas exists.
View
Temperature and Humidity... Temperature and Humidity... 2
Product available with different options
Home

Temperature and Humidity Transmitter with Large LED Display

EIC-E2XX
ApplicationsIt has been widely applied in medical field, warehouse,Electronic factory work shop,office,lab,agricultural industry,museum, Public Security Bureau interrogation room, home, office space, hotels, restaurants, schools, conference rooms, shopping malls, waiting rooms, hospitals, greenhouse nurseries, livestock breeding and other indoor...
View
Home

Chat with us on WhatsApp

English

English

Do you need advice?
Product added to wishlist
Product added to compare.

We use our own and third party cookies to obtain statistical data from our users' browsing and to improve our services. If you accept or continue browsing, we consider that you accept its use.