Pluviómetro HOBO con Registrador de Datos

RG3-M
450,00 €
Impuestos excluidos

El pluviómetro RG3-M es un sistema de recogida y registro de datos de lluvia alimentado por batería que incluye un registrador de datos HOBO® Pendant Event integrado en un pluviómetro con cubeta basculante. Este modelo registra automáticamente hasta 3200 mm de datos de lluvia que pueden ser utilizados para determinar las tasas de lluvia, tiempos y duración. También registra la temperatura cuando se utiliza con una pantalla de radiación solar opcional (RS1 Solar Radiation Shield, o M-RSA). Se requiere una estación base o una lanzadera.

Características destacadas


    Este pluviómetro de alta calidad incluye un registrador de datos HOBO Pendant Event.
    La hora y la fecha se almacenan para cada uno de los datos - proporciona los detalles necesarios para determinar las tasas de lluvia y la duración.
    Pluviómetro fiable y probado en la práctica.
    Compatible con el software HOBOware y HOBOware Pro para la configuración, graficación y análisis del registrador.
    También registra la temperatura cuando se usa con un escudo de radiación solar opcional.

Especificaciones

Rain Gauge
Maximum rainfall rate: 12.7 cm (5 in.) per hour
Calibration accuracy: ±1.0% (up to 1 in./hour for the RG3 or 20 mm/hour for the RG3-M)
Resolution: 0.01 in. (RG3) or 0.2 mm (RG3-M)
Calibration: Requires annual calibration: can be field calibrated or returned to the factory for re-calibration
Operating temperature range: 0° to +50°C (+32° to +122°F)
Storage temperature range: -20° to +70°C (-4° to +158°F)
Environmental rating: Weatherproof
Housing: 15.24cm (6-in.) aluminum bucket
Tipping bucket mechanism: Stainless steel shaft with brass bearings
Dimensions: 25.72 cm height x 15.24 cm diameter (10.125 x 6 in.); 15.39 cm (6.06 in.) receiving orifice
Weight: 1.2 Kg (2.5 lbs)
Part numbers: RG3 (0.01 in. per tip), RG3-M (0.2 mm per tip)

The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).

Logger
Time stamp resolution: 1.0 second
Time accuracy: ± 1 minute per month at 25°C (77°F), see Plot B on page 10.
Operating range: -20° to 70°C (-4° to 158°F)
Environmental rating (for logger used outside of rain gauge): Tested to NEMA 6 and IP67; suitable for deployment outdoors
NIST traceable certification: Available for temperature only at additional charge; temperature range -20° to 70°C (-4° to 158°F)
Battery: CR-2032 3V lithium battery; 1 year typical use
Memory: 64K bytes – 16K to 23K tips when recording rain only; 25K to 30K data points when recording rain and temperature
Materials: Polypropylene case; stainless steel screws; Buna-N o-ring; PVC cable insulation

The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).

Temperature Measurement
Measurement range: -20° to 70°C (-4° to 158°F)
Accuracy: ± 0.47°C at 25°C (± 0.85°F at 77°F), A solar radiation shield is required for accurate temperature measurements in sunlight.
Resolution: 0.10°C at 25°C (0.18°F at 77°F)
Drift: Less than 0.1°C/year (0.2°F/year)
Response time: Airflow of 1 m/s (2.2 mph): 10 minutes, typical to 90%

También podría interesarle

Product added to wishlist
Product added to compare.

Utilizamos cookies propias y de terceros para obtener datos estadísticos de la navegación de nuestros usuarios y mejorar nuestros servicios. Si acepta o continúa navegando, consideramos que acepta su uso.